WIFI Temperature & Humidity Sensor - Internet Of Things (IOT)

WIFI Temperature & Humidity Sensor - Internet Of Things (IOT)
WIFI Temperature & Humidity Sensor - Internet Of Things (IOT)
Product Code: WI02
Availability: In Stock
Price: USD34.95
Qty:     - OR -   Add to Wish List
Add to Compare

WIFI Temperature & Humidity Sensor - Internet Of Things (IOT

This WIFI transmitter connects directly to your WIFI access point so you send temperature and humidity readings to PrivateEyePi, or another monitoring application. It is fully assembled and requires no soldering. Connect it to power and it will advertise itself as a wireless access point. Configure it through a web browser using its easy to use config application. Once configured it will connect to your WIFI network which will give it access to the internet and the PrivateEyePi server.

Features:

  • Easy to configure web interface. No programming or soldering skills required. You do not need the internet to configure the device. Connect to it directly from any WIFI device (e.g. PC, phone tablet…)
  • Cyclic temperature transmission mode with configurable send interval
  • Supports both Celsius or Fahrenheit temperature readings
  • Sleep mode allows it to be run from battery power
  • Configurable temperature delta threshold allows the device to monitor the temperature and only transmit when the current reading exceeds the previous reading by a configurable amount. This feature is very useful for saving battery power
  • Battery level transmitted every 10 temperature transmission cycles
  • Powered either by USB Mini cable (4.5V DC to 7V DC input) or battery connection (2.5V to 3.5V) via the 2 pin battery connection plug
  • Fully programmable using the Arduino or LUA development environments 
  • Temperature and humidity sensor measures temperatures from -40°C to +80°C. Fahrenheit equivalent is -40°F to +176°F, ±0.5°C accuracy 
  • Although the sensor is highly accurate (±0.5°C accuracy) you can calibrate the temperature reading using a configuration in the WIFI sensor app
  • The device supports dual WIFI mode allowing it to be WIFI access point and a WIFI client at the same time. A WIFI access point advertises itself through an SSID and can be connected to via any device or computer that has WIFI. .

Required, but not included:

  • Mini USB cable and power supply (older cell phones used mini USB, so you may already have one in the bottom of a drawer)
  • 5V to 7V power supply. Any USB power supply will work. 
  • Battery pack (optional)

Installation:

http://projects.privateeyepi.com/WIFI-Sensor/wifi-temperature-and-humidity-sensor-configuration

Specs:

  • Demensions 74mm x 55mm x 28mm
  • Powered either by USB Mini cable (4.5V DC to 7V DC input) or battery connection (2.5V to 3.5V) via the 2 pin battery connection plug
  • -40°C to +80°C. Fahrenheit equivalent is -40°F to +176°F, ±0.5°C accuracy
  • Can be programmed using Arduino or LUA development environments
  • Upgraded using a 3.3V FTDI cable (recomended while the product is in BETA)
  • 7 GPIO ports avalaiable through the 16 pin header
  • Supports SPI serial interface

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
PrivateEyePi © 2018