Waterproof DS18B20 Dallas 1 wire digital temperature sensor and resistor

Waterproof DS18B20 Dallas 1 wire digital temperature sensor and resistor
Product Code: TS03
Availability: In Stock
Price: USD6.95
Qty:     - OR -   Add to Wish List
Add to Compare

 

 

Temperature Tutorial for Raspberry Pi

Visit the PrivateEyePi projects website for an easy-to-follow tutorial how to interface the DS18B20 sensor to your Raspbnerry Pi and link it to a web page on the internet where you can view the temperature in celcius or fahrenheit.

http://projects.privateeyepi.com/home/temperature-sensor-project-using-ds18b20

 

DESCRIPTION

This is a highly accurate and reliable temperature sensor for the Raspberry Pi. The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS18B20 can derive power directly from the data line ("parasite power"), eliminating the need for an external power supply.

Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control systems.

Cable specs:

  • Stainless steel tube 6mm diameter by 30mm long
  • Cable is 36" long / 91cm, 4mm diameter
  • Contains DS18B20 temperature sensor
  • If your sensor has four wires - Red connects to 3-5V, Black connects to ground and White is data. The copper wire is soldered to the wire shielding
  • If your sensor has three wires - Red connects to 3-5V, Blue/Black connects to ground and Yellow/White is data

DS18B20 Technical specs:

  • Usable temperature range: -55 to 125°C (-67°F to +257°F)
  • 9 to 12 bit selectable resolution
  • Uses 1-Wire interface- requires only one digital pin for communication
  • Unique 64 bit ID burned into chip
  • Multiple sensors can share one pin
  • ±0.5°C Accuracy from -10°C to +85°C
  • Temperature-limit alarm system
  • Query time is less than 750ms
  • Usable with 3.0V to 5.5V power/data

 

Datasheet: http://datasheets.maximintegrated.com/en/ds/DS18B20.pdf

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
PrivateEyePi © 2018